7 - 6
A U T O M A T I C D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Redial
If the last number you dialed was busy, press
Redial/Pause
for easy dialing.
Answering Calls with the Speakerphone
(For FAX-685MC and MFC-960MC Only)
When the FAX/MFC rings, instead of lifting the handset, press
Speaker Phone
.
Speak clearly, toward the microphone
. To end the call, press
Speaker Phone
.
If you have a bad telephone line connection, the other party might hear your voice
echoed during the call. Hang up and try the call again—OR—Pick up the handset.
Broadcasting
Using the numbers you have stored in Groups, One Touch and Speed Dial memory,
you can “broadcast” faxes automatically to a maximum of 54 different locations in a
few simple steps. (See Setting Up Groups for Broadcasting, page 7-3.) To Broadcast,
you must set MEMORY TX to either ON or NEXT FAX ONLY.
After the Broadcast is completed, a Broadcast Report will be printed automatically to
let you know the results.
1
Place the original face down in the ADF.
2
Press
Menu/Set
,
3
,
9
to select ON or NEXT FAX ONLY and press
Menu/Set
.
3
Enter the One Touch and Speed Dial numbers (one after the other) or a Group Number
you have stored.
4
Press
Start
. The FAX/MFC stores the original in memory, then transmits it to all the
numbers you entered.
Press
Stop
during transmission to cancel the current fax broadcast.
