Brother FAX-645 Owner'S Manual Download Page 43

Page: 43 / 111

S E T U P R E C E I V E

5 - 10

Press

Menu/Set

. The caller ID of the last call will appear on the display.

If no ID is stored, the beeper will sound and “NO CALLER ID” will appear on the
display.

Press

to scroll through the Caller

IDs in the memory.

Press

Menu/Set

To automatically dial the

Caller ID number, wait until the screen
prompts you to press the Start key.

Press

Start

If you wish to send a fax, insert a document
into the feeder.

Then press

Start

To cancel the Call Reply (for example, when you selected the Wrong Caller ID),
simply press

Stop

and begin again ; the Caller ID will not be lost.

Clearing the Caller ID Stored in Memory
(Only for FAX-685MC and MFC-960MC)

For the effective use of the memory, it is recommended that you should clear the
Caller ID stored into memory by pressing

Erase

when the display shows the number.

Printing Caller ID List

Press

Menu/Set

Press

to select PRINT REPORT.

Press

Menu/Set

Press

Start

Distinctive Ringing (Telstra™ Fax Stream Duet

)

Your machine has a Distinctive Ringing function, allowing you to dedicate one phone
number just for receiving faxes.

This machine feature lets you use the Distinctive Ringing subscriber service offered
by Telstra’s FaxStream

Duet, which allows you to have at least two separate

telephone numbers on the phone line. Each phone number has its own Distinctive
Ringing pattern, so you know which phone number is ringing. This is one way you can
have a separate phone number for your machine.

You can switch it off temporarily, then turn it back on. When you get a new fax
number, make sure you reset this function.

25)98874344

DIAL:PRESS START

25)09/11 15:25

TELEPHONE

DIALING

Summary of Contents for FAX-645
















































































































Search results

Summary of Contents for FAX-645

Reviews:

Related manuals for FAX-645

Brands by name

Popular brands

Brother FAX-645, Owner'S Manual

Search results

Summary of Contents for FAX-645

Reviews:

Related manuals for FAX-645

Brands by name

Popular brands