Brother DCP-J772DW, Online User'S Manual

Page: 407 / 558

Error Message Cause Action
• Press
Partial Print
to copy the
pages scanned so far.
• Clear the data in the memory. To gain
extra memory, you can turn Memory
Receive off.
See
Related Information : Turn Off
Memory Receive .
• Print the faxes stored in the memory.
See
Related Information : Print a Fax
Stored in the Machine's Memory .
Paper Size Mismatch The paper size setting does not match the
size of paper in the tray.
-
OR -
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
1. Check that the paper size you selected
on the machine's display matches the
size of the paper in the tray.
See
Related Information : Change the
Paper Size and Paper Type .
2. Make sure you loaded the paper in the
correct orientation and set the paper
guides at the indicators for your paper
size.
See
Related Information : Load Paper .
3. After you have checked the paper size
and the paper orientation, follow the
LCD instructions.
If printing from your computer, make sure
the paper size you selected in the printer
driver matches the size of paper in the
tray.
See
Related Information : Print Settings
(Windows
®
) or Print Options (Mac) .
Paper Tray not
detected The paper tray is not completely inserted. Slowly push the paper tray completely into
the machine.
Paper or a foreign object has prevented
the paper tray from being inserted
correctly. Pull the paper tray out of the machine,
and remove the jammed paper or foreign
object. If you cannot find or remove the
jammed paper, see
Related Information :
Printer Jam or Paper Jam .
Repetitive No Paper
Fed Paper dust has accumulated on the
surface of the paper pick-up rollers. Clean the paper pick-up rollers.
See
Related Information : Clean the Paper
Pick-up Rollers .
Replace Ink One or more of the ink cartridges have
reached the end of their lives. The
machine will stop all print operations.
While memory is available, monochrome
faxes will be stored in the memory. If the
sending machine has the ability to convert
it, the colour fax will be stored in the
memory as a monochrome fax. Replace the ink cartridges.
See
Related Information : Replace the Ink
Cartridges .
• You can still scan even if the ink is low
or needs to be replaced.
The maximum number of
devices are already
connected using Wi-Fi
Direct. Two mobile devices are already
connected to the Wi-Fi Direct network
when the Brother machine is the Group
Owner (G/O). After the current connection between your
Brother machine and another mobile
device has shut down, try to configure the
Wi-Fi Direct settings again. You can
confirm the connection status by printing
the Network Configuration Report.
See
Related Information : Print the
Network Configuration Report .
400