Brother 882-W33, Operation Manual

Page: 131 / 216

SEWING THE STITCHES
U
tili
ty Stit
ch
es
129
3
One-step buttonholes are sewn from the front of
the presser foot to the back, as shown below.
a Reinforcement stitching
a
Select a buttonhole stitch, and attach
buttonhole foot “A+”.
Position the upper thread under the presser foot by
guiding thread through the hole in the presser foot
before attaching the buttonhole foot “A+”.
b
Mark the position and length of the
buttonhole on the fabric.
a
Marks on fabric
b
Buttonhole sewing
c
Pull out the button holder plate on the
presser foot, and insert the button that will
be put through the buttonhole. Then tighten
the button holder plate around the button.
a Button holder plate
Squared buttonhole
Stretch buttonhole
Heirloom buttonhole
Bound buttonhole
Keyhole buttonhole
Tapered keyhole buttonhole
Keyhole buttonhole
Stitch Stitch name Presser foot
Memo
• If the fabric does not feed correctly, such as
when sewing stretchy fabrics, install the
buttonhole foot stabilizer. (page 132)
Memo
• The maximum buttonhole length is about 47
mm (approx. 1-3/4 inches) (di
thickness of the button).
Memo
• The size of the buttonhole is determined by
the size of the button in the button holder
plate.
a
b
a