Brother 882-W33, Operation Manual

Page: 74 / 216

STITCH SETTINGS
72
When you select a stitch, your machine
automatically selects the appropriate stitch width,
stitch length, and upper thread tension. However,
if needed, you can change any of the individual
settings.
Setting the Stitch Width
Follow the steps below when you want to change
the stitch pattern width.
Example:
Touch to narrow the stitch pattern width.

The value in the display gets smaller.
Touch to widen the stitch pattern width.

The value in the display gets bigger.
STITCH SETTINGS
Memo
• Settings for some stitches cannot be changed
(refer to “STITCH SETTING CHART” on
page 198).
• If you turn off the machine or select another
stitch without saving stitch setting changes
(“Saving Your Stitch Settings” on page 96),
the stitch settings will return to their default
settings.
Memo
• For an alternate method of changing the stitch
width using the speed controller, refer to
page 112.
Memo
• Touch to save the stitch settings.
• Touch to check changes made to the
stitch.
• Touch to return the stitch width to
the original setting.
Note
• After adjusting the stitch width, slowly rotate
the handwheel toward you (counterclockwise)
and check that the needle does not touch the
presser foot.