INCLUDED ACCESSORIES
16
Assembling the Spool Stand
The included spool stand is useful when using
thread spools with a large diameter (cross-wound
thread). The spool stand can hold two spools of
thread.
a
Hold in the tabs on the spool stand and
remove the lid.
a
Tabs
b
Raise the telescopic thread guide shaft and
the two spool pins.
a
Spool pins
b
Telescopic thread guide shaft
c
Fully extend the telescopic thread guide
shaft until the two internal stoppers snap
into place.
d
Turn the thread guide counterclockwise.
e
Open the upper cover of the machine, and
then place the spool stand on the upper
cover with the notches in the spool stand
aligned with the tabs on the upper cover.
a
a
b
a
IMPORTANT
• Do not place any object weighing 1 kg (2.2 lb)
or more on the top cover. Otherwise the cover
may be damaged. The weight of the spool
stand with its lid removed is about 280 g (0.6
lb).
• Do not lift the handle of the machine while the
spool stand is installed.
• Do not push or pull the telescopic thread
guide or spool pins with extreme force,
otherwise damage may result.
• Do not place any object other than spools of
thread on the spool support.
• Do not try to wind thread on the bobbin while
sewing using the spool stand.
Note
• Make sure that the spool stand is firmly
secured. Otherwise, the spool stand may fall
during sewing.
Memo
• For details on winding the bobbin using the
spool stand, refer to page 44.
• For details on upper threading using the spool
stand, refer to page 52.
Summary of Contents for 882-W33
