Brother 882-W33, Operation Manual

Page: 70 / 216

SEWING
68
* If [Reinforcement Priority] of the settings screen is set to
[ON] (page 21), reinforcement stitches are sewn instead of
reverse stitches.
Automatic Presser Foot Lowering
Function and Thread Cutting
Function
By setting the machine to automatically raise and
lower the presser foot, sewing operations can be
performed more smoothly.
Automatic Presser Foot Raising
Function
When the needle position is set to , auto up key
appears instead of pivot key. When the auto up
key is set to , the presser foot and needle are
raised automatically if the machine is stopped.
Automatic reverse/reinforcement stitching function is active.
+
At the beginning of
sewing, reverse
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reverse stitches are
sewn when “Reverse
Stitch” button is
pressed. At the beginning of
sewing, reverse
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reinforcement
stitches are sewn
when
“Reinforcement
Stitch” button is
pressed.
+
(Stitch patterns
has a dot mark
“ ”at the top of
the key)
At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reverse stitches are
sewn when “Reverse
Stitch” button is
pressed.* At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reinforcement
stitches are sewn
when
“Reinforcement
Stitch” button is
pressed.
+
Other than
straight/zigzag
stitch patterns
At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reinforcement
stitches are sewn
when “Reverse
Stitch” button is
pressed. At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reinforcement
stitches are sewn
when
“Reinforcement
Stitch” button is
pressed.
+
At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
reinforcement
stitches are sewn
when “Reverse
Stitch” button is
pressed. At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.
At the end of sewing,
when the
“Reinforcement
Stitch” button is
pressed, the
“Reinforcement
Stitch” button lights
up, machine
completes the stitch
pattern, stops
sewing, then sews
reinforcement
stitches.
“Reverse Stitch”
button
“Reinforcement
Stitch” button
No. Key Name Explanation
a [Auto Down] When [Auto Down] in the machine
settings screen is set to [ON], pressing
the “Start/Stop” button or depressing
the foot controller automatically lowers
the presser foot (if it is raised) before
starting to sew.
b [Press to Trim] When [Press to Trim] in the machine
settings screen is set to [ON], pressing
the “Thread Cutter” button
automatically lowers the presser foot
(if it is raised) before cutting the thread.
The presser foot will be raised after the
thread is cut.
a
b