Brother 882-W33, Operation Manual

Page: 17 / 216

INCLUDED ACCESSORIES
G
etting
Re
ad
y
15
1
Using Fine Tipped Stylus Pen
Touch the LCD screen using the fine tipped stylus
pen. Since the pen tip is clearly visible, it is ideal
for drawing.
a
While holding the handle, turn the pen tip
cap to remove it.
a Handle
b
Pen tip cap
b
Attach the pen tip cap to the handle before
using the pen.
Using the Multi-purpose
Screwdriver
Since the screwdriver can be changed to three
different positions, it can be extremely useful for
the various machine preparations. With this
machine, position “1” and position “3” are used.
■
Position “1”
You can install/remove the presser foot holder,
needle clamp screw.
■
Position “3”
The multi-purpose screwdriver can be positioned
over the screw on the embroidery frame to tighten
the screw after hooping the fabric or when removing
the fabric.
WARNING
• The fine tipped stylus pen contains small parts.
Keep the product out of the reach of children
to prevent accidental ingestion of small parts.
IMPORTANT
• Touch the LCD screen with the transparent
disc on the fine tipped stylus pen. Using any
other part to touch the LCD screen may cause
scratches.
• Do not pull on the transparent disc, otherwise
damage may result.
Memo
• Touching the LCD screen with the fine tipped
stylus pen at an excessive angle may prevent
the contact position from being correctly
detected.
• The soft point of the dual purpose stylus can
be used to operate the LCD screen. (page 80)
a
b
IMPORTANT
• When rotating the multi-purpose screwdriver,
do not forcefully rotate it in the direction that
it does not rotate; otherwise, it may break.