Brother 882-W33, Operation Manual

Page: 60 / 216

CHANGING THE PRESSER FOOT
58
Attaching the Presser Foot with
the Included Adapter
Some presser feet require using the included
adapter and small screw, for example, the echo
quilting foot “E” and so on.
■
Attaching the Included Adapter and
Small Screw
a
Follow the steps in “Removing the Presser
Foot” on page 57.
b
Loosen the screw of the presser foot holder
to remove the presser foot holder.
a Multi- purpose screwdriver
b
Presser foot holder screw
c Presser foot holder
c
Remove the screw of the presser foot
completely from the presser foot shaft.
d
Set the adapter on the presser foot bar,
aligning the flat side of the adapter opening
with the flat side of the presser foot bar.
Align the screw holes in the adapter and
presser foot bar, and then securely tighten
the screw with the screwdriver.
e
Turn the included small screw 2 or 3 times
with your hand.