Brother 882-C53 Operation Manual Download Page 61

Page: 61 / 312

BEFORE EMBROIDERING

ettin
g R

Basic operations

B-59

Attaching the Embroidery Foot
“W”

Press the “Needle Position” button to raise
the needle.

Press

to lock all keys and buttons.



The entire screen becomes white, and all keys and
operation buttons are locked.

Raise the presser foot lever.

Push the black button on the presser foot
holder and remove the presser foot.

Black button

Presser foot holder



Remove the presser foot from the presser foot
holder.

Use the included screwdriver to loosen the
screw of the presser foot holder, then
remove the presser foot holder.

Screwdriver

Presser foot holder

Presser foot holder screw



Remove the presser foot holder.

Position the embroidery foot “W” on the
presser foot bar by aligning the notch of the
presser foot to the large screw.

Side view

CAUTION

• When attaching a presser foot, always press

on the screen to lock all keys and

buttons. You may accidentally press the
“Start/Stop” button and possibly cause injury.

• Be sure to use embroidery foot when doing

embroidery. Using another presser foot may
cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.

CAUTION

• When attaching a presser foot, always press

on the screen to lock all keys and

buttons. You may accidentally press the
“Start/Stop” button and possibly cause injury.

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands