Brother 882-C53 Operation Manual Download Page 93

Page: 93 / 312

SELECTING UTILITY STITCHES

tility
S

titc
h

Sewing

S-23

■

Retrieving Saved Settings

Select a stitch.

Press .



The memory function screen appears.

Press .

Press the numbered key of the settings to be
retrieved.

Press

to return to the original screen without

retrieving settings.

Numbered keys

Press .



The selected settings are retrieved. Press

return to the original screen.

Memo

• When a stitch is selected, the last settings

retrieved are displayed. The last settings
retrieved are retained even if the machine
was turned off or a different stitch was
selected.

Memo

• To save new settings when there are

already 5 sets of settings saved for a stitch,

press

in the memory function screen.

Press the numbered key of the setting to be

deleted. Press

and then

Press

and then

. The new

setting will be saved in place of the recently
deleted setting.

• You can delete all the saved settings by

pressing .

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands