Brother 882-C53 Operation Manual Download Page 170

Page: 170 / 312

USING THE MEMORY FUNCTION

S-100

Press .

Press

to delete the stitch pattern. The pattern

will be deleted from the USB media.



The selected stitch pattern is recalled and the sewing
screen will be displayed.

Recalling from the Computer

For Computers and Operating Systems, see
“Connecting Your Machine to the Computer” on
page S-94.

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine (see page S-97).

On the computer, open “Computer (My
computer)” then go to “Removable Disk”.

Move/copy the pattern data to “Removable
Disk”.



Stitch pattern data in “Removable Disk” is written to
the machine.

Press .



The stitch patterns in the computer are displayed on
the selection screen.

Press the key of the stitch pattern you want
to recall.

Press

to return to the original screen without

recalling.

Note

• While data is being written, do not

disconnect the USB cable.

• Do not create folders within “Removable

Disk”. Since folders are not displayed, stitch
pattern data within folders cannot be
recalled.

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands