Brother 882-C53 Operation Manual Download Page 232

Page: 232 / 312

USING THE MEMORY FUNCTION

E-50

Recalling from the Computer

For Computers and Operating Systems, see
“Connecting Your Machine to the Computer” on
page E-44.

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine (see page E-47).

On the computer, open “Computer (My
computer)” then go to “Removable Disk”.

Move/copy the pattern data to “Removable
Disk”.



Pattern data in “Removable Disk” is written to the
machine.

Press .



The patterns in the computer are displayed on the
selection screen.

Press the key of the pattern you want to
recall.

Press

to return to the original screen.

Press .



The embroidery screen is displayed.

Note

• While data is being written, do not

disconnect the USB cable.

• Do not create folders within “Removable

Disk”. Since folders are not displayed, stitch
pattern data within folders cannot be
recalled.

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands