Brother 882-C53 Operation Manual Download Page 94

Page: 94 / 312

SEWING THE STITCHES

S-24

Straight Stitches

See page S-67 for the detailed information of
stitches.

Left needle position

Middle needle position

Reverse stitch

Reinforcement stitch

Select a stitch.

Attach presser foot “J”.

Attach presser foot “N” when you select

Hold the thread tail and fabric with your
left hand, and rotate the handwheel with
your right hand to insert the needle into the
fabric.

Sewing start position

Lower the presser foot, and hold the
“Reverse Stitch” or “Reinforcement Stitch”
button to sew 3-4 stitches.



The machine sews reverse stitches (or reinforcement
stitches).

SEWING THE STITCHES

Stitch

Stitch name

Presser foot

Straight stitch (Left)

Straight stitch (Middle)

Triple stretch stitch

Stem stitch

Decorative stitch

Basting stitch

Memo

• Refer to “Sewing Reinforcement

Stitches” on page S-5 for the detailed
information of reverse stitches and
reinforcement stitches.

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands