Brother 882-C53 Operation Manual Download Page 150

Page: 150 / 312

SELECTING STITCH PATTERNS

S-80

■

Adjusting the Character Spacing

The space between the characters can be adjusted.

Press .

Press

to display

on the screen.



The character spacing window appears.

Press

to adjust character spacing.

Press

to increase the character spacing and

press

to decrease the character spacing.

Example:

Each setting equals a specific distance between
characters.

Value

0.18

0.36

0.54

0.72

0.9

1.08

1.26

1.44

1.62

1.8

Memo

• The default setting is “0”. No number less

than “0” can be set.

• Changing character spacing by this

method, pertains to all characters. Spacing
changes are valid not only while entering
characters but also before and after the
entering of characters.

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands