Brother 882-C53 Operation Manual Download Page 242

Page: 242 / 312

SELECTING PATTERNS TO EDIT

E-60

Press

to change the layout of the

pattern.

If the characters are too small to see, press

view a display of all entered characters.

Select the layout. (Example:

)

When selecting an arc, use

and

change the degree of the arc.

Press

to make the arc flatter.

Press

to make the arc rounder.

Press

to return to the original screen.

After you finish your selections, press



The “Embroidery Edit” screen will appear.

Proceed to “EDITING PATTERNS” on
page E-61 to edit the pattern.

Memo

• When

selecting ,

and

change to

and

. You can

increase or decrease the incline.

Note

• To add multiple lines, press

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands