Brother 882-C53 Operation Manual Download Page 166

Page: 166 / 312

USING THE MEMORY FUNCTION

S-96

Press .



A confirmation message appears.

Press .

If you decide not to delete the stitch pattern, press



The machine deletes the stitch pattern, then
automatically saves the new stitch pattern.

Saving Stitch Patterns to USB
Media

When sending stitch patterns from the machine to
USB media, plug the USB media into the
machine’s top USB port.

Press .

Memo

• USB media is commercially available, but

some USB media may not be usable with
this machine. Please visit our website for
more details.

• Depending on the type of USB media being

used, either directly plug the USB device
into the machine’s USB port or plug the
USB media Reader/Writer into the
machine’s USB port.

• The USB media can be inserted or removed

at any time except when saving or deleting.

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands