Brother 882-C53 Operation Manual Download Page 245

Page: 245 / 312

EDITING PATTERNS

Em
br

oide

Ed
it

Embroidering

E-63

Moving the Pattern

For details on moving the pattern, refer to “Moving
the Pattern” on page E-36.

Rotating the Pattern

For details on rotating the pattern, refer to
“Rotating the Pattern” on page E-38.

Changing the Size of the Pattern

For details on changing the size of the pattern,
refer to “Changing the Size of the Pattern” on
page E-37.

Deleting the Pattern

Press

to delete the pattern from the screen.

Displaying Patterns in the Screen
Magnified by 200%

Press .



The pattern is magnified by 200%.

Check the displayed pattern.



Use

to scroll through the display

in any direction.

To display the pattern back to the normal
size (100%), press

Summary of Contents for 882-C53

























































































































































































































































































































Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands

Brother 882-C53, Operation Manual

Search results

Summary of Contents for 882-C53

Reviews:

Related manuals for 882-C53

Brands by name

Popular brands