manualshive.com logo in svg

Brocade Communications Systems FastIron, Administration Manual, Page: 52 / 388

Share
Download
Brocade Communications Systems FastIron Administration Manual Download Page 52

NTP associations detail command output descriptions (Continued)

TABLE 6   

Field

Description

rcv time

Receive time stamp of the last packet.

xmt time

Transmit time stamp of the last packet.

filter delay

Round-trip delay in milliseconds of last 8 samples.

filter offset

Clock offset in milliseconds of last 8 samples.

filter error

Approximate error of last 8 samples.

Configuration Examples

The following sections list configuration examples to configure the Brocade device.

NTP server and client mode configuration

Sample CLI commands to configure the Brocade device in NTP server and client modes.

Brocade(config-ntp)# server 10.1.2.3 minpoll 5 maxpoll 10

Brocade(config-ntp)# server 11::1/64

Brocade(config-ntp)# peer 10.100.12.18

Brocade(config-ntp)# peer 10.100.12.20

Brocade(config-ntp)# peer 10.100.12.67

Brocade(config-ntp)# peer 10.100.12.83

NTP client mode configuration

Sample CLI commands to configure the Brocade device in NTP client mode.

Brocade(config-ntp)# server 10.1.2.3 minpoll 5 maxpoll 10

Brocade(config-ntp)# server 11::1/24

Brocade(config-ntp)# peer 10.100.12.83

Brocade(config-ntp)# disable serve

NTP strict authentication configuration

Sample CLI commands to configure the Brocade device in strict authentication mode.

Brocade(config-ntp)# authenticate

Brocade(config-ntp)# authentication-key key-id 1 md5 key123

Brocade(config-ntp)# server 10.1.2.4 key 1

NTP loose authentication configuration

Sample CLI commands to configure the Brocade device in loose authentication mode. This allows
some of the servers or clients to use the authentication keys.

Brocade(config-ntp)# authentication-key key-id 1 md5 key123

Brocade(config-ntp)# server 10.1.2.4 key 1

Brocade(config-ntp)# server 10.1.2.7

Configuration Examples

52

FastIron Ethernet Switch Administration Guide

53-1003625-01

Summary of Contents for FastIron





































































































































































































































































































































































































Reviews:

No comments