manualshive.com logo in svg

Brocade Communications Systems FastIron, Administration Manual, Page: 315 / 388

Share
Download
Brocade Communications Systems FastIron Administration Manual Download Page 315

Explanation

A user made Syslog configuration changes to the specified Syslog server
address, or enabled or disabled a Syslog operation through the SNMP,
console, SSH, or Telnet session.

Message Level

Informational

Message

SYSTEM: Optic is not Brocade-qualified ( port-
number )

Explanation

Brocade does not support the optical transceiver.

Message Level

Informational

Message

System: Fan fan id (from left when facing right
side), ok

Explanation

The fan status has changed from fail to normal.

Message Level

Informational

Message

System: Fan speed changed automatically to fan
speed

Explanation

The system automatically changed the fan speed to the speed specified in
this message.

Message Level

Informational

Message

System: No free TCAM entry. System will be
unstable

Explanation

There are no TCAM entries available.

Message Level

Informational

Message

System: Static MAC entry with MAC Address mac-
address is added from the unit / slot / port to
unit / slot / port on VLANs vlan-id to vlan-id

Explanation

A MAC address is added to a range of interfaces, which are members of
the specified VLAN range.

Message Level

Informational

Syslog messages

FastIron Ethernet Switch Administration Guide

315

53-1003625-01

Summary of Contents for FastIron





































































































































































































































































































































































































Reviews:

No comments