Canceling a scheduled reload
To cancel a scheduled system reload using the CLI, enter the following command at the global
CONFIG level of the CLI.
device#reload cancel
Diagnostic error codes and remedies for TFTP transfers
This section describes the error messages associated with TFTP transfer of configuration files,
software images or flash images to or from a Brocade device.
Error
code
Message
Explanation and action
1
Flash read preparation
failed.
A flash error occurred during the download.
Retry the download. If it fails again, contact customer support.
2
Flash read failed.
3
Flash write preparation
failed.
4
Flash write failed.
5
TFTP session timeout.
TFTP failed because of a time out.
Check IP connectivity and make sure the TFTP server is running.
6
TFTP out of buffer space. The file is larger than the amount of room on the device or TFTP server.
If you are copying an image file to flash, first copy the other image to
your TFTP server, then delete it from flash. (Use the
erase flash
... CLI
command at the Privileged EXEC level to erase the image in the flash.)
If you are copying a configuration file to flash, edit the file to remove
unnecessary information, then try again.
7
TFTP busy, only one
TFTP session can be
active.
Another TFTP transfer is active on another CLI session, or Web
management session, or network management system.
Wait, then retry the transfer.
8
File type check failed.
You accidentally attempted to copy the incorrect image code into the
system. For example, you might have tried to copy a Chassis image into
a Compact device.
Retry the transfer using the correct image.
16
TFTP remote - general
error.
The TFTP configuration has an error. The specific error message
describes the error.
Correct the error, then retry the transfer.
17
TFTP remote - no such
file.
Canceling a scheduled reload
110
FastIron Ethernet Switch Administration Guide
53-1003625-01