show sysmon system sfm
Displays the status of the switch fabric modules.
Syntax
show sysmon system sfm
{
all
|
number
}
Parameters
all
Displays the statistics for all SFMs on the device.
number
Specifies the SFM ID for which the statistics is to be displayed.
Modes
User EXEC mode.
Privileged EXEC mode.
Global configuration mode.
Usage Guidelines
This command is supported only on FSX devices.
Examples
The following command displays the statistics for all SFMs on the device.
Brocade(config)# show sysmon system sfm all
SFM= 1,Xbar= 2
X-link Status FlowCtrl FA-dev/Link Status FlowCtrl
2 OK 0x0 19/0 OK 0x0
3 OK 0x0 13/0 OK 0x0
4 OK 0x0 0/1 OK --
5 OK 0x0 3/0 OK 0x0
7 OK 0x0 10/1 OK --
8 OK 0x0 7/0 OK 0x0
9 OK 0x0 17/0 OK 0x0
=======================================================
SFM= 1,Xbar= 3
X-link Status FlowCtrl FA-dev/Link Status FlowCtrl
1 OK 0x0 17/1 OK 0x0
2 OK 0x0 3/1 OK 0x0
4 OK 0x0 0/2 OK --
5 OK 0x0 19/1 OK 0x0
7 OK 0x0 10/2 OK --
10 OK 0x0 7/1 OK 0x0
11 OK 0x0 13/1 OK 0x0
=======================================================
show sysmon system sfm
FastIron Ethernet Switch Administration Guide
283
53-1003625-01