Specifies that all stack units are cleared of errors.
Modes
Global configuration mode.
Examples
The following example clears the fabric adaptor sysmon counters.
Brocade(config)# clear sysmon counters fa error all
show sysmon logs
Displays the entries written to syslog for all event types if the action specified is to log them into
syslog. If the action specified is
none
, the sysmon logs display nothing.
Syntax
show sysmon logs
Modes
Privileged EXEC mode.
Global configuration mode.
Examples
The following example displays the syslog entries that were made by sysmon if the action specified
either at the global level or type level was to log the events to syslog. If the action specified was
none
,
no syslog entries exist.
Brocade(config)# show sysmon logs
Aug 3 03:59:22:C:Sysmon:XBAR LINK: SFM1/XBAR1/FPORT0 -- NO SYNC
Aug 3 03:59:22:C:Sysmon:FA Link: SLOT9/FA16/Link0 -- HG.Link error
Aug 3 03:58:22:W:Sysmon:PP ERROR: SLOT4/PP6 error occurred
Aug 3 03:59:34:W:Sysmon:FA ERROR: SLOT1/FA0 error occurred
Aug 3 03:60:34:W:Sysmon:XBAR ERROR: SFM1/XBAR1/FPORT2 -error occurred
The following table describes the output of this command:
show sysmon log s command output fields
TABLE 38
Field
Description
Date and time
Aug 3 03:59:22
Critical or Warning
A ‘C’ indicates a critical error and a ‘W’ indicates a warning.
Sysmon
Message coming from Sysmon
Event type
Possible values are FA ERROR, FA Link, XBAR ERROR, XBAR LINK, or PP ERROR
Component identifier
Identifies the component of the system where the error was detected
Error
A brief description of the error
show sysmon counters
Displays sysmon counters for all or specific event types.
show sysmon logs
278
FastIron Ethernet Switch Administration Guide
53-1003625-01