Brocade Communications Systems FastIron SX 1600, Configuration Manual, Page: 467 / 593

TABLE 102 show ip bgp neighbors output descriptions (continued)
Field Description
• FIN-WAIT-1 - Waiting for a connection termination request
from the remote TCP, or an acknowledgment of the connection
termination request previously sent.
• FIN-WAIT-2 - Waiting for a connection termination request
from the remote TCP.
• CLOSE-WAIT - Waiting for a connection termination request
from the local user.
• CLOSING - Waiting for a connection termination request
acknowledgment from the remote TCP.
• LAST-ACK - Waiting for an acknowledgment of the connection
termination request previously sent to the remote TCP (which
includes an acknowledgment of its connection termination
request).
• TIME-WAIT - Waiting for the specific time to ensure that the
remote TCP received the acknowledgment of its connection
termination request.
• CLOSED - There is no connection state.
Maximum segment size Shows the TCP maximum segment size.
TTL check Shows the TCP TTL check.
Byte Sent Shows the number of bytes sent.
Byte Received Shows the number of bytes received.
Local host Shows the IPv4 address of the device.
Local port Shows the TCP port that the device is using for the BGP4 TCP session
with the neighbor.
Remote host Shows the IPv4 address of the neighbor.
Remote port Shows the TCP port the neighbor is using for the BGP4 TCP session with
the device.
ISentSeq Shows the initial send sequence number for the session.
SendNext Shows the next sequence number to be sent.
TotUnAck Shows the count of sequence numbers sent by the device that have not
been acknowledged by the neighbor.
TotSent Shows the count of the sequence numbers sent to the neighbor.
ReTrans Shows the count of the sequence numbers that the device retransmitted
because they were not acknowledged.
UnAckSeq Shows the current acknowledged sequence number.
IRcvSeq Shows the initial receive sequence number for the session.
RcvNext Shows the next sequence number expected from the neighbor.
SendWnd Shows the size of the send window.
TotalRcv Shows the count of the sequence numbers received from the neighbor.
DupliRcv Shows the count of the duplicate sequence numbers received from the
neighbor.
RcvWnd Shows the size of the receive window.
SendQue Shows the count of the sequence numbers in the send queue.
RcvQue Shows the count of the sequence numbers in the receive queue.
CngstWnd Shows the number of times the window has changed.
Displaying BGP4 information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 467