manualshive.com logo in svg

Brocade Communications Systems FastIron SX 1600, Configuration Manual, Page: 336 / 593

Share
Download
Brocade Communications Systems FastIron SX 1600 Configuration Manual Download Page 336

Displaying OSPFv3 SPF information

You can display the following OSPFv3 SPF information:

•

SPF node information

•

SPF node information for a specified area.

•

SPF table for a specified area.

•

SPF tree for a specified area.

Enter the command at any level of the CLI to display SPF information in a node.

device# show ipv6 ospf spf node

SPF node for Area 0.0.0.200

 SPF node 192.168.98.213,  cost: 0,  hops: 0

  nexthops to node:

  parent nodes: 

  child nodes: 192.168.98.111:136 192.168.98.111:1156 

 SPF node 192.168.98.111:136,  cost: 1,  hops: 1

  nexthops to node:    :: e 4/3/1

  parent nodes: 192.168.98.213 

  child nodes: 192.168.98.111:0 

 SPF node 192.168.98.111:1156,  cost: 1,  hops: 1

  nexthops to node:    :: ve 17 

  parent nodes: 192.168.98.213 

  child nodes: 192.168.98.111:0 

 SPF node 192.168.98.111:0,  cost: 1,  hops: 2

  nexthops to node:    fe80::768e:f8ff:fe3e:1800 e 4/3/1

                       fe80::768e:f8ff:fe3e:1800 ve 17 

  parent nodes: 192.168.98.111:136 192.168.98.111:1156 

  child nodes: 

SPF node for Area 400

 SPF node 192.168.98.213,  cost: 0,  hops: 0                      

  nexthops to node:

  parent nodes: 

  child nodes: 

SPF node for Area 0.0.0.0

 SPF node 192.168.98.213,  cost: 0,  hops: 0

  nexthops to node:

  parent nodes: 

  child nodes: 192.168.98.111:0 

 SPF node 192.168.98.111:0,  cost: 1,  hops: 1

  nexthops to node:    5100::192:113:111:111 VLink 1

  parent nodes: 192.168.98.213 

  child nodes: 192.168.98.61:5 192.168.98.190:1551 192.168.98.112:643 

 SPF node 192.168.98.61:5,  cost: 2,  hops: 2

  nexthops to node:    5100::192:113:111:111 VLink 1

  parent nodes: 192.168.98.111:0 

  child nodes: 192.168.98.61:0 

 SPF node 192.168.98.190:1551,  cost: 2,  hops: 2

  nexthops to node:    5100::192:113:111:111 VLink 1

--More--, next page: Space, next line: Return key, 

For example, to display information about SPF nodes in area 0, enter the 

show ipv6 ospf spf node area

 command at any level of the

CLI.

device# show ipv6 ospf spf node area 0

SPF node for Area 0

SPF node 10.223.223.223,  cost: 0,  hops: 0

 nexthops to node:

 parent nodes:

 child nodes: 10.223.223.223:88

SPF node 10.223.223.223:88,  cost: 1,  hops: 1

 nexthops to node:    :: ethe 1/3/2

 parent nodes: 10.223.223.223

 child nodes: 10.1.1.1:0

SPF node 10.1.1.1:0,  cost: 1,  hops: 2

 nexthops to node:    fe80::2e0:52ff:fe91:bb37 ethe 1/3/2

Displaying OSPFv3 information

FastIron Ethernet Switch Layer 3 Routing

336

53-1003627-04

Summary of Contents for FastIron SX 1600


















































































































































































































































































































































































































































































































































































































Reviews:

No comments