2
Fabric OS Command Reference
53-1002147-01
Understanding Virtual Fabric restrictions
1
Additional command restrictions apply depending on whether Virtual Fabrics or Admin Domains are
enabled in a fabric.
NOTE
Virtual Fabrics and Admin Domains are mutually exclusive and are not supported at the same time on a
switch. To use Admin Domains, you must first disable Virtual Fabrics; to use Virtual Fabrics, you must first
delete all Admin Domains. Use
ad
--
clear -f
to remove all Admin Domains. Refer to the
Fabric OS
Administrator’s Guide
for more information.
Understanding Virtual Fabric restrictions
All Fabric OS commands are subject to additional RBAC enforcement with regard to Virtual Fabric
contexts and switch types. Commands can be executed in one or more of the contexts described in
Table 3
. Execution of chassis commands requires chassis permissions.
Switch commands are further defined by the switch type restrictions as described in
Table 4
. Switch type
restrictions are not applicable to commands that require chassis permissions.
In a Virtual Fabric environment where contexts are enforced, the following Virtual Fabric restrictions
apply to the RBAC permissions specified in
Table 2
. Refer to
userConfig
help for more information on
configuring user account access permissions in a Virtual Fabric environment.
•
Any given role is allowed to execute all switch commands to which the role is authorized in the
account’s home context. The default home context is the default logical fabric FID 128.
•
You can change an account’s home context to a specified FID and configure the account
permissions to access additional logical switches specified in the user’s Fabric ID list.
•
Accounts with user or admin permissions can be granted chassis permissions. A user account with
the chassis role can execute chassis-level commands at the user RBAC access level. An admin
account with the chassis role can execute chassis-level commands at the admin RBAC access
level.
TABLE 3
Virtual Fabric contexts
Context type
Definition
Switch context
Command applies to the current logical switch only, or to a specified
logical switch.
Chassis context
Command applies to the chassis on which it is executed.
Switch and Chassis
context
Command can be executed in a logical switch context or in a chassis
context.
Disallowed
Command is not supported in Virtual Fabric mode.
TABLE 4
Switch Types
Switch Type
Definition
All Switches
Command can be executed in any switch context.
Base Switch Only
Command can be executed only on the base switch.
Default Switch Only
Command can be executed only on the default switch.
N/A
Command is a chassis command or not supported in Virtual Fabric
mode.
