Brocade Communications Systems Brocade 8/12c Command Reference Manual Download Page 23

Page: 23 / 1132

Fabric OS Command Reference

xxiii

53-1002147-01

•

portLedTest

- The

--slot

option must be specified with the

-por

t option on bladed systems.

•

bpPortLoopbackTest

- New

spd_mode 16

for 16G platforms.

•

PortLoopbackTest

- New

spd_mode

and

for 10G and 16G platforms.

Encryption

Updates to

cryptoCfg

command to support the following new functionality:

•

cryptocfg

--reclaimWWN

- Support for moving an encryption switch or blade to another encryption

group and reclaiming the WWN.

•

cryptocfg

--kvdiag

- Provides an interface for key vault diagnostics.

•

cryptocfg

--show -mkexported_keyids

- Lists exported master keys.

Fabric Services

•

The following commands have been enhanced to display Diagnostic D_Port information for
inter-switch link testing:

fabPortShow

fabricLog

portCfgShow

portShow

switchShow

•

fabricLog

- Added descriptions of port states and switch states.

•

Support for Fabric Name:

switchShow

- Displays Fabric Name if configured.

FabricShow

-Displays Fabric Name if configured.

•

Support FCP probing on NPIV devices.

fcpProbeShow

- Display the probing information for NPIV devices.

configure

- New configuration parameter "Allow NPIV Probing".

•

Support for user-defined port name:

portName

- Sets default port name up to 128 characters long.

Use the

configure

command to disable the feature.

The

portShow

command displays the port name.

configure

- New option to disable assignment of a default port name:

Fabric Watch

Updates to the following help pages:

•

SwitchStatusPolicySet

- Support for Missing SFP and Error Port policies.

•

SwitchStatusPolicyShow

- Support for Missing SFP and Error Port policies.

•

SwitchStatusShow

- Support for Missing SFP and Error Port policies.

•

sfpShow

- Enhanced to support the following new displays:

New

-health

operand displays Fabric Watch information for 10G/16G SFPs and 16G QSFPs.

Tracks fabric watch state transitions for these new SFPs.

Speed unit changed to Gbps (from MB/S).

New field displays power on time in years/hours.

•

fwFruConfig

- Support for SFP State Change configuration (no. longer done with

thConfig

Summary of Contents for Brocade 8/12c













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Brocade 8/12c

Reviews:

Brands by name

Popular brands

Brocade Communications Systems Brocade 8/12c, Command Reference Manual

Search results

Summary of Contents for Brocade 8/12c

Reviews:

Brands by name

Popular brands