Deploy door sensor
Add a door sensor
| 67
B | Mount sensor
1. Place the wired sensor on or above
the door frame.
2. Secure the sensor with two #12,
316 stainless steel screws.
Match the screw to the type and
depth of surface material.
C | Mount magnet
1. Place the magnet on the door,
aligned within 5 cm of the
mounted sensor.
2. Secure the magnet with two #12,
316 stainless steel screws.
Match the screw to the surface
material.
max. 5 cm
②
Prepare door sensor
cable
Prepare a door sensor cable for your
BRNKL Rapid Deploy.
To run a door sensor cable:
• From the door sensor, run the
cable to the Rapid Deploy.
Lengthen the cable to make longer
cable runs.
To lengthen a door sensor cable:
1. Cut the
white
segment of cable.
2. Splice extra cable with the cut
ends:
> Add a length of marine grade
2
conductor cable
, 22-16 AWG.
Summary of Contents for Rapid Deploy
