Deploy camera
Add a camera
| 93
B | Mount camera
1. Place the camera in position.
2. Mark the two screw holes.
On hardened surfaces, drill pilot
holes as required.
3. Secure the mount with two #10,
5/8” 316 stainless steel screws.
Match screws to the surface
material.
Don’t tighten the screws.
4. Aim the camera toward the
desired view.
5. Tighten the screws to fasten.
2x
2x
②
Prepare camera cable
Prepare a camera cable for your
BRNKL Rapid Deploy.
To run a camera cable:
• From the motion sensor, run the
cable to the Rapid Deploy.
Lengthen the cable to make longer
cable runs.
To lengthen a camera cable:
1. Cut the
white
segment of cable.
2. Splice extra cable with the cut
ends:
> Add a length of marine grade
4
conductor cable
, 22-16 AWG.
Summary of Contents for Rapid Deploy
