BRNKL Rapid Deploy, Setup Manual, Page: 62 / 114

60 |
Add a float switch
Deploy float switch
B | Mount float switch
1. Separate the float switch from the
mounting base.
Press and hold the tabs on the
sides of the base, then pull the
switch to remove.
2. Place the mounting base in
position.
3. Secure the base with two #12, 316
stainless steel screws.
Match the screw to the type and
depth of the surface material.
4. Reattach the switch to the base,
press to secure.
5. Make sure the float moves freely.
②
Prepare float switch
cable
Prepare a float switch cable for your
BRNKL Rapid Deploy.
To run a float switch cable:
• From the float switch, run the
cable to the Rapid Deploy.
Lengthen the cable to make longer
cable runs.
To lengthen a float switch cable:
1. Cut the white segment of cable.
2. Splice extra cable with the cut
ends:
> Add a length of marine grade
2
conductor cable
, 22-16 AWG.