BRNKL Rapid Deploy, Setup Manual

Page: 54 / 114

52 |
Add the satellite device
Deploy satellite device
bracket with the 35 mm hex
screws.
Before tightening the screws, align
the sides of the device with the
horizon.
6. At the fixable point closest to the
device, secure the cable with cable
ties to reduce cable strain.
Allow a 5 cm (2”) bend in the cable.
2. Attach the mount using the
supplied 12 mm hex screws, metal
washers, and plastic washers.
3. On the bottom of the mount,
loosen and remove the 35 mm hex
screws.
4. Remove the bottom bracket.
5. On the railing, hold the assembly in
place while reattaching the bottom