BRNKL Rapid Deploy, Setup Manual

Page: 64 / 114

62 |
Add a float switch
Deploy float switch
④
Test float switch
connection
Test a float switch connection to your
BRNKL Rapid Deploy.
To test a float switch connection,
follow these steps:
A | Plug in indicator light
On the connection panel:
1. Plug the indicator light into the
OUTPUT
port.
2. Press firmly to secure.
The light should be off.
B | Check connection
1. On the float switch, lift and hold
the float in for 5 sec.
OUTPUT
2.
Within 30 sec
, check the indicator
light.
If the light turns on , the device is
connected.
The light turns
off
after 1 min.
3. If the device isn’t connected:
> Check the cable connections.
> If deploying within mobile
network coverage, open BRNKL
on your mobile device:
• Make sure BRNKL is Armed .
• In the device settings, make
sure Alert on is set to High.
• In the device settings, make
sure Output on alert is set to
Output 1 .