2
This manual describes the installation and operation of the Breckwell, SP22 wood heater. This heater meets
the 2020 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold after May 15,
2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging from 4,814 to
32,788 Btu/hr, 0.49 g/hr, and 63% efficiency.
Thank you for purchasing the stove, you are now prepared to burn wood in the most efficient, convenient way possible. To achieve the safest,
most efficient and most enjoyable performance from your stove, you must do three things: 1) Install it properly; 2) Operate it correctly; and
3) Maintain it regularly. The purpose of this manual is to help you do all three.
PLEASE read this entire manual before installation and use of this pellet fuel-burning room heater. Failure to follow these instructions
could result in property damage, bodily injury or even death.
Keep this manual handy for future reference.
This stove has been independently tested to ASTM E1509-12 (2017), Standard Specification for Room Heaters, Pellet Fuel Burning Type 1,
ULC-S627 Standard For Space Heaters For Use With Solid Fuels, and ULC-628 Standard For Fireplace Inserts.
This pellet stove, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70.
The authority having jurisdiction (such as municipal building department, fire department, fire prevention bureau, etc.) should be consulted
before installation to determine the need to obtain a permit.
This appliance is designed specifically for use only with pelletized wood. It is designed for residential installation according to current
national and local building codes as a freestanding room heater. It is also approved as a mobile home heater which is designed for
connection to an outside combustion air source.
The stove will not operate using natural draft or without a power source for the blower systems and fuel feed system and must not be
burned with any type of coal (see PROPER FUEL).
This stove is designed to provide the optimum proportions of fuel and air to the fire in order to burn free of smoke and soot. Any blockage of
the air supply to or from the stove will seriously degrade its performance and will be evidenced by a smoking exhaust and a sooting window.
For best operation the ash content of the pellet fuel should be less than 1% and the calorific value approximately 8200 BTU/LB. Avoid high
ash content fuels because this will rapidly fill up the burn pot and eventually cut off the combustion air supply.
Commercial and industrial installations of this stove should not be used since operational control is often not well managed in these
settings.
Note: Register your product on line at www.breckwell.com. Save your receipt with your records for any claims.
R
INTRODUCTION
