BRAILLO
l
B 650 SW2.1
110
5.25
Electric unit - replace fuses
The fuses are placed on a PCB inside the electric unit. See figures below for how to open the box, and
figure on the next page for the fuses. Remember to disconnect the mains cable first!
Unscrew all screws
To release the power supply, place a
screw driver here and pull the latch
downwards
To get more room to inspect and replace the fuses, it is best to move the power supply a little out of
the way. This can be done without disconnection the wires. See figure below:
Power supply
