BRAILLO
l
B 650 SW2.1
9
2. INSTALLATION
Space:
The minimum space required for the Braillo 650 SW2.1 is approximately 4.8 m x 3.0 m (16 x 10 feet).
It is required at least 1.5 m free space behind the Roll unwinder so that the paper roll can be replaced.
Environment:
Braillo printers are made to operate continuously and to be reliable for many years. However, sensi
-
tive electronic and mechanical parts require a suitable installation environment to ensure long and
trouble-free operation. Temperature should be between 15° - 30° C (60° - 86° F), and relative humidity
between 40 and 60%.
Maintain a clean environment because dust may clog the printer - especially when combined with
high humidity! Too low humidity should also be avoided to prevent electrostatic problems.
Some paper qualities may generate excessive paper dust. This should be removed with a vacuum
cleaner and a damp cloth. (About every 50,000 sheets).
Electrical:
Single phase 230 volt (+/- 10%), 50/60 Hz, circuit breakers should be min. 6 amps.
Be sure to consult your distributor/supplier for further details concerning the installation site.
Failure to meet the installation requirements may relieve the supplier of any warranty responsibilities.
3.336 m
2.592 m
Viewed from
above
