BRAILLO
l
B 650 SW2.1
97
When assembling, the marking
“UPPER” and “LOWER” on the
paper shoes and beams, must be
facing this side.
Paper feed
and cutter
Top frame bolts
Magnet rack A
Magnet rack B
Beam and paper shoes - removal and refitting (continued)
Now the paper shoes and beams can be lifted carefully upwards.
Assembly is done in the reverse order. Please note that the marking “UPPER” and “LOWER” on the
paper shoes and beams should be turned to the side where the paper enters the printer.
4. Remove the top frame
Unscrew the bolts as indicated on the figure below, and then lift the frame carefully upwards and
place it aside.
5. Remove magnet rack A and B
See section
for more info.
3. Remove the paper feed and cutter
Please see section
5.19 ‘Paper feed and cutter assembly - removing’ on page 104
on how to remove the paper feed and cutter.
