BRAILLO
l
B 650 SW2.1
37
3.
Click the ‘Forget network’ button
4.
Click the ‘Activate & exit setup’ button
After clicking the ‘Activate & exit setup’ button, you will get a confirmation message and the configu
-
ration mode shuts down and the printer returns to normal with the new configuration.
To exit the WLAN configuration mode:
To exit configuration mode you need to either:
•
Save and activate a new configuration
•
Click the ‘Exit setup’ button on configuration web page
•
Click the ‘Back’ button in the printer display
When the configuration server shuts down the printer returns to normal operation.
If a new wireless configuration was activated you can see the connection status and signal strength in
the top right corner of the printer display.
Note! If the printer behaves unexpectedly after being in Wireless network configuration mode, please
try restarting the printer.
To remove an already configured wireless network without activating a new:
1.
Follow step 1 and 2 in the start of this section
2. Click the ‘Forget network’ tab
