Braillo 600 SR, User Manual

Page: 70 / 119

4.10 Beam and papershoes, removal and refitting
To remove the beam and papershoes, some other parts
must be removed first. And it should be done in this order:
1. Before removing the paper cutter:
Make sure that the position on the cutter can be
re-established by fixing the position plates at the back
edge of the cutter. This has to be done at both sides.
Remove the paper cutter assembly
2. Remove the paper feeder assembly
3. Remove the inside paper guide
4. Remove magnet rack A and B
5. Remove the belt
6. Remove the top frame
Position plate
BRAILLO
l
B 600 SR
70
1. Paper cutter
assembly
2. Paper feeder assembly
4. Magnet racks A and B
3. Inside paper guide