Braillo 600 SR, User Manual

Page: 105 / 119

Functions, description.
When the printer is finished printing one sheet, it will send a electric pulse to the stacker electronic.
This is what happens after one pulse is received.
1. The paper holder will go down and lock the paper
2. The paper cutter will start to cut the sheet
3. When the sheet is cut the paper holder will release the paper again
4. The sheet will fall down into the stacker
5. A photocell will detect the sheet when the sheet has fallen all the way down
6. The paper mover will push the sheet into the stack of paper
If the photocell does not detect the sheet within a period of time after cutting, it will trig an alarm. The
alarm will go back to the printer, and the printer will stop, presuming there is a paper jam.
There is also a photocell at the rear end of the conveyor belt. This one will detect if the conveyor belt
is full of paper, and send a message back to the printer.
Overview electronics
BRAILLO
l
B 600 SR
105
Valves for paper
mover and trans-
port belt
Cable connections PLC
Connector for signal cable
printer/stacker (RJ45)