Braillo 600 SR, User Manual, Page: 71 / 119

Beam and paper shoes, removal and refitting (continued)
7. Now the beams and paper shoes can be lifted carefully upwards.
Assembly is done in the reverse order. Please observe that the marking “Upper” and “Lower” on the
paper shoes and press bars should be facing the side where the paper goes into the printer.
5. Remove the belt.
This is done by loosening the belt tensioner’s
screws. When this is done, the belt can be lifted
off the upper cogwheel. Please see figure to the
right.
Loosen these
two screws to
take off the belt
6. Remove the top frame.
Unscrew the screws as indicated on
the figure to the right, and then lift
the frame carefully upwards and
remove.
The marking “Upper”
and “Lower” must face
this side.
BRAILLO
l
B 600 SR
71