Braillo 600 SR, User Manual

Page: 37 / 119

Test Sensors:
Main Menu - Warning - Service/Diagnostic - Test Sensors
This is a function made for troubleshooting the sensors on the Printer.
The “On” or “Off” is indicating the current status of the sensor.
To find out if a sensor is OK, the sensor can be switched on and off
physically, and the text in the display will change between “On” and
“Off” accordingly if the sensor is functioning.
- Cover open
This is the switches on the side panels on the Printer.
- Beam Wheel
This is the sensor fitted on the lower shaft on the Printer.
- Paper feed 1
This is the first sensor on the paper transportation in the Printer.
- Paper feed 2
This is the second sensor on the paper transportation in the Printer.
- Out of paper
This is a sensor that check if there is paper present in the Printer.
It’s fitted on the paper guide on the input side of the Printer.
Status Software:
Main Menu - Warning - Service/Diagnostic - Status Software
A window that will show the Printers current IP address,
the MAC address and the Software version.
Clear Magnet Failure:
Main Menu - Warning - Service/Diagnostic - Clear Magnet Failure
This menu choice is normally not visible, but if there has been detected
a faulty magnet during printing, a magnet icon will be shown in the
“Ready to emboss” window. Now the “Clear Magnet Failure” becomes
visible in the “Service/Diagnostics” menu and here the magnet icon
can be reset.
The Clear magnet
failure choice
BRAILLO
l
B 600 SR
37