4.11 Beam - replacement of short pivot arm
See the figures below:
1. Remove the four screws
as indicated in the figure.
Pull out the short pivot
arms, there are 21 pcs. on
each shaft.
2. Pull out the shaft, and
replace the short pivot
arm(s).
Assembly is done in
reverse order.
Note! When putting the short pivot arms back into the beam, be sure that the printing pins are hanging
vertically like in the figure. This is to make room for the short pivot arm.
BRAILLO
l
NORWAY AS
B 300 S2
61
Summary of Contents for 300 S2
