The magnet rack must be adjusted in two directions, horizontal and vertical.
The horizontal adjustment is done first. This adjustment positions the magnet rack correctly in relation
to the short pivot arms. If the printer prints too many or too few dots, the horizontal adjustment could
be the problem.
Then the vertical adjustment is done. This adjustment will affect the pressure the pivot arms put on the
printing pins. This directly affects the shape of the printed dots.
To be able to adjust the magnet rack correctly, it
is necessary to put the printer in “printing posi-
tion”.
This is done by rotating the main belt by hand
until the arrows at the ends of the shaft are point-
ing exactly 180 degrees away from each other.
It is possible to get the mechanism to balance in
this place, but you can also lock the shafts with
e.g. a self locking wrench (vice-grip pliers).
BRAILLO
l
NORWAY AS
B 300 S2
53
Horizontal
adjustment
Vertical
adjustment
Summary of Contents for 300 S2
