4.4 Magnet rack - disassembly, step by step
There are two main reasons for disassembling the magnet rack.
It could be to replace some parts, i.e. defect magnet, worn
pivot arm, or it could be for regular maintenance.
The magnet racks can be considered as the part of the printer
that will have the greatest influence on the dot quality, so it is
very important to know how to deal with them.
Take the magnet rack out of the printer like described in section
4.3. ‘Magnet rack - removal’ on page
43
.
Next, follow the instructions below.
Step 1.
Remove the two bolts holding the sponge list, and then remove the sponge list.
Sponge list
BRAILLO
l
NORWAY AS
B 300 S2
44
Summary of Contents for 300 S2
