Braillo 300 S2, User Manual

Page: 23 / 93

BRAILLO
l
NORWAY AS B 300 S2
23
Braille type:
Main Menu - Paper Layout - Braille type
Selects between 6 and 8 dot mode.
Line spacing:
Main Menu - Paper Layout - Line spacing
Selects the Line spacing. The range is from 0 to 16.
16 steps are the standard line spacing (5.08 mm or 0.2”), 8 is
the setting for making dots continuously down the sheet (line
spacing is 2.54 mm or 0.1”). Note that if the setting is less than
7, and there is text on each line, the dots might get damaged in
the printing process. Normal setting is 16 steps.
Double line spacing:
Main Menu - Paper Layout - Double line spacing
The function “Single or Double line spacing” will double the
given line spacing. If, e.g. the current line spacing is 13 steps
(4.1275 mm), selecting Double line spacing will increase it to
26 steps (8.2550 mm). Normal setting is Single line spacing.
Page adjust:
Main Menu - Paper Layout - Page adjust
This setting will decrease the number of lines on each page
from 0 to 9. If the maximum number of lines could be 29, and
the setting “Max-4” is selected, the resulting number of lines
will be 25. This function will keep the top margin constant and
only the bottom margin will vary. The normal setting is 0.
Form feed mode:
Main Menu - Paper Layout - Form feed mode
Selects between ‘Normal Form Feed’ or ‘No Form Feed’.
Normal setting is Normal Form Feed.
Page margin:
Main Menu - Paper Layout - Page margin
The “Page Margin” function will adjust the page margin in
steps from 0 to 20. The standard setting is 8, (8 = normal).
One step is equal to 0.6350 mm. It will “push” the text down-
wards the sheet (like a top margin). If the text reaches the
bottom, (meaning that there will not be enough space on this
page for the last line), this line will wrap over to the next page.
The normal setting is 8 steps.