Beam and paper shoes - removal and refitting (continued)
Now the paper shoes and beams can be lifted carefully upwards.
Assembly is done in the reverse order. Please note that the marking “UPPER” and “LOWER” on the
paper shoes and beams should be turned to the side where the paper enters the printer.
4. Remove the top frame
Unscrew the bolts as indicated on the
figure below, and then lift the frame
carefully upwards and remove.
Place aside.
5. Remove magnet rack A and B
3. Remove the paper feed tractor
Please see section
4.16. ‘Paper feed assembly - remov-
ing’ on page 66
for a description on how to remove
the tractor.
BRAILLO
l
NORWAY AS
B 300 S2
60
When assembling, the mark-
ing “UPPER” and “LOWER”
on the papershoes and beams,
must be turned to this side.
Remove
paper feed tractor
Top frame bolts
Magnet rack A and B
Summary of Contents for 300 S2
