UNI EN ISO 9001-2015 n° 9115.BRMO
USER MANUAL
“Aquarius Plus”
File name
Date
Page
Code
PUT9I001 PUT9I1K5
DF19009A
05/04/19
17
di
32
PUT9I002
PUT9I003
MD03006C
- All rights are reserved according to the law. Reproducing or distributing this document to third parties without permission is prohibited.
LCD display includes a section with numerical values, a graphic section of the power supplied, a
graphic section of the fan status and a graphic section of the battery status.
The numerical values section displays: the input voltage and frequency, the output voltage and
frequency, the output powers, the temperature, the voltage and the percentage of battery charge,
for example, as shown in the figure above, the output voltage is 220V, the output frequency is
50Hz.
Graphic section of battery capacity and load: each box represents 20% of capacity.
As shown in the figure above, the battery capacity is between 80% and 100% (5 panels), the load
is between 40% and 60% (3 panels). When the UPS is overloaded, the icon will flash, when the
battery capacity is too low or disconnected, the icon will flash.
Fan –
Defines the fan status. In case the fan is working properly, the graph simulates the rotation
of a propeller. In the event of an anomaly, the fan symbol will begin to flash.
Charger – When
the charger is working properly, its symbol will follow a pattern like that shown in
the following figure.
In the event of a malfunction, the symbol will start to flash. When the UPS is in battery mode, the
number of charging status icons will vary depending on the battery capacity. For example: if there
are five boxes (as in the figure below), the corresponding number of lines is five lines (like the
following image on the left).
Illustration 9: Example
screen
