UNI EN ISO 9001-2015 n° 9115.BRMO
USER MANUAL
“Aquarius Plus”
File name
Date
Page
Code
PUT9I001 PUT9I1K5
DF19009A
05/04/19
16
di
32
PUT9I002
PUT9I003
MD03006C
- All rights are reserved according to the law. Reproducing or distributing this document to third parties without permission is prohibited.
Key setting function
Consultation mode:
Press and hold this key for more than 2 seconds: interface setting function.
Mode setting function:
Press the button for more than half a second (less than 2 seconds): Confirms the set option.
Press the button for more than 2 seconds to exit this interface with the setting function.
5.2
Function of the LED indicators
Warning Red LED is on: UPS is faulty. For example: overload beyond the allowed time,
inverter failure, BUS failure, high temperature, etc.
Bypass Yellow LED on: UPS is in alarm. For example: active bypass, etc.
Battery Yellow LED on: UPS is in alarm. For example: battery inverter power supply mode.
Inverter Green LED on: UPS is normally powered from the mains or in ECO mode or in battery
mode.
When the UPS starts up, the four LEDs light up and go off one at a time. This sequence
repeats several times until the UPS has finally started up.
NOTE: Regarding the indication of the LEDs in different modes, please refer to the LED
display panel and the warning table.
5.3
Functions of the LCD display
The LCD display appears as shown in the figure
:
Illustration 8: Display
