BOXER KING 5600, Service Manual

Page: 89 / 140

Service Manual 04/2010 Rev.B
89
Remove the pin by using the tool for removal
of cylinder pin (Fig.179).
Fig.179
Close the cylinder.
Turn off the machine.
Press the coil valve by screwdriver to unload
the remaining pressure (
5.13 Fig.93).
Remove the oil hoses.
Remove the top split pin #1and washer #2
(Fig.180).
Remove the cylinder pin from the bottom
(Fig.180).
Fig.180
Remove the defective cylinder.
Install the new cylinder.
IMPORTANT!
THE PISTON MUST BE ORIENTED AT 90°
COMPARED TO THE FRAME FOR AN EASY
INSTALLATION ON THE SADDLE (FIG.181)
Fig.181
Mount the cylinder pin from the bottom.
Install the top washer #2 and split pin #1
(Fig.180).
Fit the oil hoses by using new copper
washers.
Switch the machine on.
Take a tyre lever, open the cylinder and drive
its piston by lever into the saddle bracket
(Fig.182).
Fig.182
Install the pin (Fig.183).
Fig.183
Mount the plate locking (Fig.178).