BOXER KING 5600, Service Manual

Page: 84 / 140

Service Manual 04/2010 Rev.B
84
MOBILE TABLE IS VERY
HEAVY: HANDLE IT WITH
CARE TO AVOID FEET AND
FINGERS CRUSHING.
Fig.161
Close the saddle cylinder completely.
Switch the machine off.
Press the coil valve by screwdriver to unload
the remaining pressure (
5.14 Fig.93).
Install the manometer on the saddle hose of
the hydraulic assy (Fig.162).
Fig.162
Switch the machine on.
Make a saddle translation ‘till end of stroke
watching the manometer: the pressure shown
by the manometer must be included between
30 and 50 BAR (430 and 720 PSI) during all
translation (Fig.163).
Fig.163
If the sliding pressure shown by the
manometer will be considerably higher than
50Bar (720PSI), the saddle needs adjustment.
TO ADJUST THE SLIDING PRESSURE:
Position the saddle in the middle of the frame
on the king 5600R (Fig.164), while the King
5600 saddle needs to be open a little
(Fig.165).
Fig.164
Fig.165